BLDG Owners2019-03-25T19:58:06+00:00

Did you know?

The OSHA Walking-Working Surfaces rule requires employers to ensure that workers who use personal fall protection or who work in other specified high hazard situations are trained, or retrained if necessary, about fall and equipment hazards, including fall protection systems.

qualified person must train these workers to identify and minimize fall hazards; to use personal fall protection systems and rope descent systems; and to maintain, inspect, and store equipment or systems used for fall protection.

Building Owners and Managers

Saving money is essential but saving lives is invaluable. 

Building owners and managers, of course, need to control operational costs, but managing buildings with complete fall protection systems  including adequate roof anchorages  is a must.  Fall protection and suspended maintenance systems provide safety for contractors working at heights, ensuring that there are proper connections from which these ones can attach personal protective equipment.   

Are your buildings compliant with OSHA regulations for fall protection?

OSHA’s latest fall protection standard, covering an estimated 112 million workers, aims to prevent injuries and fatalities from falls.  The new OSHA Walking-Working Surfaces rule aligns general industry requirements with existing fall protection standards for the construction industry. 

What does this mean for building owners and managers?

The new OSHA rule  in effect since 2017* — requires that building owners inform suspended maintenance contractors, such as a window washing company, in writing that the building owner has identified, tested and certified each anchorage can support at least 5,000 pounds in any direction for each worker that is attached in a rope descent system**.  OSHA’s new rule also specifies safe distances from building edges and fall protection requirements at heights of 4 feet or more.   These anchorage certifications must be conducted by a qualified person***.   

Additionally, the Building Owners and Managers Association (BOMA) recommends that building owners conduct background checks on all contractors providing such services to verify that they meet the qualifications for inspecting and certifying roof anchorage points.   

OSHA’s rule requires that employers who use personal fall protection and work in other specified high hazard situations — like rooftops with unprotected edges — are adequately trained in fall safety measures****.  Building owners bear the responsibility to provide training by a qualified person.  

Summit Anchor Co.  understands the importance of working safely at height, as well as the complexities of design and installation of an OSHA compliant fall protection system.  We also have qualified persons who can certify your existing fall protection systems.  Contact Summit Anchor today to bring your property into compliance with OSHA regulations. Go to the edge with Summit Anchor. 

 *Final Rule to Update General Industry Walking-Working Surfaces and Fall Protection Standards, https://www.osha.gov/walking-working-surfaces/  
**Enforcement Guidance for General Industry Rope Descent System (RDS) Anchorage Requirements (29 CFR 1910.27(b)(1)), https://www.osha.gov/laws-regs/standardinterpretations/2017-11-20 
*** OSHA Fact Sheet, https://www.osha.gov/Publications/OSHA3903.pdf